- +86 13418678020
- sales@lddisplay.com
- Mon - Fri: 9:00 - 18:30
CUSTOM CORRUGATED SRP / RRP
A shipping case that becomes your retail display. Custom-printed boxes and trays designed to carry your products to the store, open for replenishment, and keep your brand visible on the shelf.
From 100 units • Structural design & dieline support
ONE PACK, TWO JOBS
Shelf-ready packaging (SRP), also called retail-ready packaging (RRP), combines the outer delivery pack with the tray used in-store. Staff remove the opening panel or hood and place the filled tray on the shelf, instead of handling each item separately.
Keep the agreed case quantity together from filling through to shelf placement.
A low front edge and retained branded panels help shoppers see and reach the retail pack.
Match the outside footprint and product facings to the shelf, rather than adapting a standard shipping box.
CHOOSE THE PACK FORMAT
Compare the opening method and what remains on the shelf. Each format is developed around your finished retail packs and distribution requirements.
A one-piece case with a removable perforated section. After opening, the remaining base becomes the display tray.
Best starting point: a closed transit pack that opens into a shelf display.
A separate cover protects the products during handling. Lift the hood away at the store, while the printed tray stays with the products.
Best starting point: a clearly defined display tray with a removable cover.
An open-front tray presents the retail packs directly. It can travel inside an agreed outer pack or with a separate protective cover.
Best starting point: shelf visibility and access for boxed, canned or jarred goods.
Internal partitions help organise smaller packs, different flavours, or several product rows. The layout keeps each group in its planned position.
Best starting point: multiple rows or a mixed assortment in one tray.
THE OPENING MAKES THE DIFFERENCE
The removable section should release without pulling away the front branding or damaging the retail packs. The tray that stays behind needs enough support to hold the product group, with a front edge low enough for picking.
MATCH THE PRODUCT
The retail pack changes how a tray should hold, present, and release the product. These are application options to discuss.
Organise bars, sachets, and small cartons in rows. The tray front should show the pack artwork while keeping the assortment together.
Allow for the filled weight, cap clearance, and the space needed to lift out each item. Dividers can be reviewed where the arrangement needs separation.
Group small retail cartons, tubes, or bottles in a branded tray. Keep the product names visible and the presentation tidy as stock is removed.
MADE TO YOUR SPECIFICATION
Your pack dimensions, shelf footprint, and printed panels work together. Start with the filled product arrangement, then develop the structure and artwork around it.
| Product fit | Finished retail-pack dimensions, filled weight and units per case. |
|---|---|
| Shelf footprint | Maximum outside width, depth and height, plus the required number of facings. |
| Opening | Tear-away panel, lift-off hood or open tray; identify the parts retained on shelf. |
| Board & support | Corrugated construction, partitions and reinforcement selected for the filled pack and handling route. |
The panels left after opening are the selling space. Put the brand, product name and shelf-facing graphics on those retained surfaces; keep essential information away from tear lines and folds.
We support structural design, 3D visualisation, dielines, and graphics. Use the confirmed dieline for final artwork, then agree colours, print areas and any requested finish.
Design is usually provided without a separate charge; complex or repeated dieline changes may involve a project-specific fee.
Choose flat delivery for assembly at your filling site, or discuss assembled and product-filled packing where the project calls for it. Filling responsibility, outer cartons, pallet arrangement, and delivery scope are agreed in the quotation.
For a retail programme, send the retailer’s current brief together with the packing-line requirements. Suitability for a retailer, automated line, or specific handling condition is reviewed for that project.
LEADER DISPLAY
Leader Display manufactures cardboard displays, PDQ units, and paper packaging. Our production work includes surface treatment, paper mounting, die cutting, gluing, assembly, packing, and dispatch. For an SRP project, the structure, printed surfaces, and pack-out need to follow the same approved specification.
When comparing shelf-ready packaging suppliers, look beyond workshop photographs. Ask how the sample is approved, which panels remain on the shelf, and how the finished order will be packed. We bring those decisions into the project brief so the proposed pack can be reviewed as a complete product, rather than separate artwork and structural files.
FACTORY SUPPORT / STRUCTURAL DEVELOPMENT
We provide structural design, 3D visualisation, dielines, and graphic support. A 3D view helps your team compare the proposed pack before the artwork is finalised; the physical sample is where product fit, opening, and handling can be reviewed together.
Send the actual retail packs where possible. Caps, seals, flexible-pouch bulges, and variations between SKUs can change the space required. A tray developed from nominal dimensions alone may miss these details.
Use the design service and sampling review to resolve the construction before the production files are released.
A structural sample and a printed sample answer different questions. Agree on which versions you need and which colours, surfaces, or finishes must be reviewed physically.
FACTORY SUPPORT / MAKING THE COMPONENTS
An SRP pack needs the printed faces, cuts, folds, and assembly points to line up. The order specification connects those details with the sample you have approved.
Paper mounting and surface treatment are coordinated with the chosen board and print requirements. Die-cutting then defines the blank, including folds, slots, and the intended removable section.
The position of a cut or crease can affect both assembly and the shelf-facing artwork. Keep logos, product information, and barcode areas clear of the agreed fold and tear zones. Any change to the structure should be reflected in the production drawing before the artwork is released.
Gluing and assembly turn the prepared components into the specified pack. A tray-and-hood design, a one-piece tear-away box, and a divided tray require different joints and component arrangements.
Confirm whether the order leaves flat, partly assembled, or ready for filling. The production brief should identify the correct components, assembly sequence, and packing condition, helping your filling team receive the format it expects.
FACTORY SUPPORT / AGREED CHECKS
CLOSED CASE → OPEN TRAY
Agree on the sample reference and inspection scope with the order. The review needs to cover the closed delivery pack and the opened tray, because they perform different jobs.
Check the agreed internal and external measurements, the filled assortment, and the position of any partitions. Include the shelf footprint and hood clearance, rather than judging fit from an empty pack.
Review the intended tear path or cover removal with the products loaded. Look for difficult grip points, unwanted tearing, loose sections, or edges that obstruct product selection.
Compare the artwork version and retained display panels with the approved reference. Check required print areas, folds, component orientation, and glued joints, especially where opening changes what remains visible.
Confirm the agreed quantity per outer carton, the separation of components, and identification marks. For assembled or filled delivery, include product orientation, protective packaging, and the instructions needed at the receiving end.
If your retail programme requires stacking, transit, or other performance testing, identify the method, load, conditions, and acceptance criteria in the brief. A successful fit check or an attractive sample does not establish a general transport rating. Required validation and supporting documentation are agreed for the specific construction.
FACTORY SUPPORT / READY FOR DELIVERY
The right delivery format depends on where the products will be loaded and how the store receives them. Plan this before the order is produced, so the pack construction, assembly work, and outer packing support the same route.
For product-filled delivery, agree on who supplies the goods, who loads them, and how the finished units are protected and identified. Confirm any outer-carton, pallet, label, or retailer instructions alongside the destination and delivery scope.
| Flat-packed | For assembly and filling at your site. Agree on component counts, bundle protection, and the assembly information your team needs. |
|---|---|
| Assembled | For a pack delivered in the agreed form condition. Review occupied volume and protection for exposed panels and edges. |
| Product-filled | For an agreed loading and pack-out service. Confirm product supply, SKU assortment, quantities, and receiving requirements. |
The available scope depends on the construction, order, and destination. Freight and transit time are quoted separately from production.
PLAN YOUR ORDER
Start with a quantity and delivery destination. Pricing depends on the dimensions, board, printing, structure, and packing scope.
| Minimum order | From 100 units, 200 units often offer better unit pricing. |
|---|---|
| Sampling | Usually 2–4 calendar days from receipt of deposit. |
| Bulk production | Usually 10–15 calendar days from receipt of deposit. |
| Sample charge | Usually around US$120, adjusted for size and complexity. Bulk-order refund terms are agreed upon per project. |
Scheduling depends on quantity, structural complexity and specification readiness. Transit time and freight are separate.
RELATED PACKAGING & DISPLAYS
Choose the range that matches where the product will be sold.
For a separate countertop display rather than a shipping case converted on the shelf.
For shipping protection, where an on-shelf display function is not the main requirement.
For the individual branded retail carton that sits inside the SRP case or tray.
Shelf ready packaging and retail ready packaging are closely related terms for packaging designed to move from distribution into retail presentation. For your project, the useful distinction is the opening method, the tray left on shelf and the requirements of the retail channel.
An SRP pack is designed around both delivery and shelf replenishment. A counter display is primarily a separate point-of-sale display. If a display travels filled, its transit packing still needs to be agreed.
Yes. A reference case, a filled retail pack and the retailer brief help define the structure. Include the changes you need, such as a lower front edge, a different case count or a removable hood.
Yes, the layout can be developed for a mixed assortment. Provide the dimensions, weights and quantity of each SKU so the rows, clearances and any dividers can be reviewed.
Send the retailer’s current packaging, shelf and pallet requirements. We review the proposed construction against that brief. A general product image does not establish approval for every retail programme.
This page covers secondary packaging around finished retail packs. Food-contact requirements, certification and recycling suitability depend on the exact board, coatings, components and destination; specify any required documentation with the enquiry.
Planning a retail programme? Read our SRP buyer guide.
LET’S DEVELOP YOUR PACK
Share your product, case quantity, and shelf requirements. Add a reference picture if you have one.
Get a Quote on WhatsApp
We will contact you within 1 working day, please pay attention to the email with the suffix “@lddisplay.com”.
Automated page speed optimizations for fast site performance